|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MN15G1601 Type ROM (x8-bit) x RAM (x 4-bit) x Package Number of Instructions Minimum Instruction Execution Time MN15G1601 16 K 512 LQFP064-P-1414 *Lead-free 103 0.5 s at 1/4 frequency dividing (at 3.0 V to 5.5 V, 8 MHz) 1.0 s at 1/4 frequency dividing (at 2.4 V to 5.5 V, 4 MHz) 2.0 s at 1/8 frequency dividing (at 2.0 V to 5.5 V, 4 MHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.3 V. * RESET * IRQ1 * IRQ2 * IRQ3 Timer counter 0 : 8-bit x 1 (event count, pulse output, simple pulse width meausurement, PWM output, remote control carrier output) Clock source ********************* 1/2, 1/8, 1/32, 1/128 of system clock frequency; 1/1, 1/4, 1/16, 1/64 of XI(OSC) oscillation clock frequency Timer counter 1 : 8-bit x 1 (event count, pulse output, remote control carrier output) Clock source ********************* 1/2 of system clock frequency; 1/1, 1/214 of OSC oscillation clock frequency; 1/1, 1/26 of XI oscillation clock frequency Possible 16-bit cascade connection with timer counter 0 Timer counter 2 : 8-bit x 1 (event count, pulse output, simple pulse width meausurement, PWM output, remote control carrier output, one-shot timer output, trigger start PWM output, trigger start timer output) Clock source ********************* 1/2 of system clock frequency; 1/1, 1/2 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; TCI input Timer counter 3 : 8-bit x 1 (event count, pulse output, remote control carrier output, high-functional PWM output) Clock source ********************* 1/2 of system clock frequency; 1/1, 1/2 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; TCI input Possible 16-bit cascade connection with timer counter 2 Watchdog timer Interrupts Timer Counter Serial Interface I/O Pins A/D Inputs LCD Zero-Cross Inputs Special Ports I/O Serial : 8-bit x 1 (synchronous type) Clock source ********************* 1/1, 1/2 of system clock frequency; SBT pin input 35 * Common use : 31 * Specified pull-up resistor available : 27 (software programmable) * Specified output architecture available : Nch open drain / push-pull : 31 (software programmable) 10-bit x 8-ch. (with S/H) 30 segments x 4 commons (1/2 , 1/3 , 1/4 duty) 1 Buzzer output (1 kHz, 2 kHz, 4 kHz : fosc = at 4 MHz) 1 MAC00001DEM MN15G1601 Electrical Characteristics Supply current Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 Supply current at HALT IDD4 IDD5 IDD6 Supply current at STOP IDD7 IDD8 IDD9 Condition min fosc = 8 MHz (1/8 dividing) fosc = 4 MHz (1/8 dividing) fosc = 32.768 kHz (1/8 dividing) fosc = 4 MHz (1/8 dividing) fosc = 32.768 kHz (1/8 dividing) ACZ = 1/2 VDD, Ta = 25C ACZ = 1/2 VDD, Ta = -40C to +85C Ta = 25C Ta = -40C to +85C typ 1.8 1.2 9.0 0.3 1.5 4.0 max 3.5 2.5 20 0.6 8.0 10 30 1.0 5.0 mA mA A mA A A A A A Unit (Ta = -40C to +85C, VDD = 5.0 V, VSS = 0 V) Pin Assignment PB3/SEG15 PB2/SEG14 PB1/SEG13 PB0/SEG12 PA3/SEG11 PA2/SEG10 PA1/SEG9 PA0/SEG8 P93/SEG7 P92/SEG6 P91/SEG5 P90/SEG4 P83/SEG3 P82/SEG2 P81/SEG1 P80/SEG0 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 COM0 COM1 COM2 COM3 SEG22/AD0 SEG23/AD1 SEG24/AD2 SEG25/AD3 SEG26/AD4 SEG27/AD5 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 MN15G1601 MN15G1601 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 P62/TCO P61/START P60/NIRQ P33/key7 P32/BZ/key6 P31/NTCI/key5 P30/ACZ/key4 P23/SBT/key3 P22/SBO/key2 P21/SBI/key1 P20/NSYNC/key0 P13/PWMO3 P12/PWMO2 P11/PWMO1 P10/PWMO0 P03 SupportTool In-circuit Emulator EPROM Built-in Type Type ROM (x 8-bit) RAM (x 4-bit) PX-ICE1500 + PX-PRB15G1601-LQFP064-P-1414 MN15GP1601 16 K 512 0.5 s at 1/4 frequency dividing (at 3.0 V to 5.5 V, 8 MHz) 1.0 s at 1/4 frequency dividing (at 2.4 V to 5.5 V, 4 MHz) 2.0 s at 1/8 frequency dividing (at 2.3 V to 5.5 V, 4 MHz) Package LQFP064-P-1414 *Lead-free Minimum instruction execution time SEG28 / AD6 SEG29 / AD7 VREF+ VDD VLC1 VLC2 VLC3 OSC1 OSC2 XI XO NRST VSS P00 P01 P02 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LQFP064-P-1414 *Lead-free MAC00001DEM 2 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2002 JUL |
Price & Availability of MN15G1601 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |